
Home | Products |
Contact Us
Corrugation printing machine,
Board Printer, Corrugated Printing
Machine, Flexo printing machine, Carton Printing
Machine,

Corrugation Printing Machine / Board Printer
FEATURES
-
The Printing Quality of our Flexo Printing machine is Excellent . The reason is that in our machine we use German made Endless
Rubber Blanket .While Printing the paper or sheets some impression from the
stereos do come on the Rubber Blanket. As the Length of Rubber blanket is
nearly 14 Feet in Single Co lour machine. The effect of impressions is
minimized due to Shear Length. The other manufacturers do not use Rubber
Blanket and loose impressions come directly on the Pressure Roller Dia of
which is only maximum 5” .So the impression roller spoils with loose ink very
soon .Resulting in bad prints after few days. As the impression roller is
under the printing cylinder and operator has to go beneath the machine to
clean it up so it continues to spoil day after day, week after week and
sometime month after month and impressions on the paper continue to be
deteriorated. As the cost of rubber blanket is nearly high so other
manufacturers save this financial liability at the cost of printing quality.
Our Rubber blanket can be cleaned easily by water/ detergents after the
finishing of work everyday. This will maintain the excellent printing quality
of our machine.
-
Main Frame made from graded steel held together by means of
heavy cross supports.
-
Rubberized ink rollers.
-
The Corrugation Printing Machine can print on Glued Boxes as well as flat sheets or
Paper.
-
The Board Printer Machine can print on Single, Double, Triple, Five, Seven or
Any Ply Board.
-
Ink trays made from heavy gauge M S sheets.
-
Heavy duty Imported endless Rubber Blanket with Tensioning
Arrangement.
-
All rollers made from seamless pipes duly machined and ground
and run on ball bearings.
-
The Machine can work on Any Ink; Water Base As well as Thinner
Base Inks.
-
Variable Speed from 0-2000 Impressions per Hour.
OPTIONAL AT EXTRA COST
-
Dryer unit blower provided with the Flexo printing
machine,
NINE Elements and One Blower in the full width
of the machine acts as HOT AIR BLOWER for immediate ink drying. IT IS VERY
USEFUL IN
COLD/HUMID REGIONS WHERE INK DOES NOT DRY IMMEDIATELY AFTER IMPRESSION.
TEMPERATURE OF BLOWER IS CONTROLLED BY THERMOSTAT.
Technical Specifications
|
Model |
Printing Area Size |
Power Required |
|
STARP-I |
50" x 70" |
2HP |
|
STARP-II |
50" x 74" |
2HP |
|
STARP-III |
52" x 84" |
3HP |
|
STARP-IV |
64" x 84" |
5HP |
|
STARP-V |
84" x 100" |
5HP |
|
STARP-VI |
84" x 125" |
7.5 HP |
|
STARP-VII |
95" x 175" |
10 HP |
All the above Machines are available in Single,
Double, Three, Four Color Formats.
Board Printer,
corrugation printing machine, Corrugated Printing Machine, Carton
Printing Machine
© Star Engineering Works Amritsar 2002.
All rights reserved.